Drive DTC
Sign in Get Drive DTC

Trouble code libraryIgnition and misfires

P0335 Crankshaft position sensor problem

Generic SAE definitionCrankshaft position sensor A circuit

Short trips onlyDrive it only if you have to, gently and not far. Get it fixed right away.

Check this first

If it stalls or won't restart when hot, this sensor is usually why.

What usually fixes it

In the order a good shop checks them. Typical total: $119–$355 at $130 an hour.

  1. Crankshaft position sensor

    $134–$322

    They fail when hot and leave you stranded.

  2. Wiring or connector

    $140–$315

    Chafed wiring near the engine gives the same symptoms.

Code titles are the generic SAE definitions. Prices are typical US parts and labor for a common car or light truck – a guide for judging a quote, not a quote. Always confirm a repair against the vehicle in front of you.

Drive DTC

See what your vehicle says about P0335

A stored code is a headline, not the story. The vehicle also holds the conditions from the moment the code set, how close each part is to the limit it fails at, what the fuel trims are doing, and whether the fault is still happening. Drive DTC reads all of it with a USB adapter and a Windows PC – read-only by design.

  • Free to start
  • Codes in plain English
  • One-time purchases, no subscription
Get Drive DTC Check a VIN for recalls
Diagnose · Trouble codes
The Trouble codes screen in Drive DTC: stored, pending and permanent counts, then C0040-13 explained in plain English with what to check first, likely fixes in order and typical cost ranges

More in Ignition and misfires

All 25 codes in this group
P0315Crankshaft position system variation not learned P0325Knock sensor 1 circuit (Bank 1 or single sensor) P0330Knock sensor 2 circuit (Bank 2) P0340Camshaft position sensor A circuit (Bank 1 or single sensor) P0345Camshaft position sensor A circuit (Bank 2) P0351Ignition coil A primary/secondary circuit